top of page

High-quality, easily serviceable, long-lasting equipment for use by the surface preparation, restoration and maintenance industry. BW Manufacturings' goal is to achieve the best and most cost efficient systems available for surface preparation.

DG-16

The DG-16 walk behind is unlike any
other grinder on the market today.
  • The 16” floating grinding head is adjusted up and down using spring pressure, allowing infinite adjustability.
  • A specifically designed shroud keeps the machine and work area virtually dust free when connected to the A-101 Pulse Vac.
  • The DG-16 is designed for coating removal to high gloss polishing on totally dry concrete. Course diamond segments, for coating removal, can easily be changed to fine resin pads to reach your desired gloss.

Diamond Grinder/Polisher Applications

  • Garage Floors

  • Pre Coating Preparation

  • Coating Removal                     

  • Concrete Polishing

  • Industrial Floor Resurfacing

  • Under shelving 

Standard Features

  • Built in compressed air pulsation for continuous dust-free operation

  • High amp motor

  • Low center of balance prevents tip overs

  • Easy to handle dump system

  • 120 Volt powered (220 Volt Optional

A-101 Pulse Vac

The A-101 Pulse Vac is unlike any other

vacuum on the market today.

  • The built in air pulsation system continuously cleans the air filter, making it ideal for the removal of fine dust powders without clogging.

  • The A-101 Pulse Vac houses a 2 stage vacuum motor, making it one of the most powerful vacuums that operates on 120V.

  • Your reduction in filter cleaning labor combined with its adaptability to all shrouded equipment, the A-101 Pulse Vac is the most essential and recommended vacuum by contractors today.

 

DG-725-ME Grinder Shroud

 

The new innovative DG-725-ME Grinder Shroud was designed to grind irregular surface environments encountered on concrete floors.

  • It’s kind steel sealing ring glides easily over any surface

  • Is carburized and hardened to give you years of dust free grinding without wear.

  • Features a rubber mount specifically designed to connect to the shroud.

    • The rubber mount allows you to move the grinder at any angle, while keeping the sealing ring of the shroud body in full contact with the concrete surface, providing exceptional dust containment.

    • A rubber diaphragm controls the amount of vacuum force that is connected to the grinder which prevents the shroud from sticking to the floor like a suction cup.

  • The DG-725-ME also features the use of a smaller connecting vacuum hose that will not obstruct the movement of the grinder.

  • The DG-725-ME Grinder Shroud is designed to fit the Metabo Model# W24-240 and are sold together as DG-71-ME Hand Held Diamond Grinder

Applications and Features

  • Metabo Model #W24-230

  • Coating removal

  • Concrete preparation

  • Controlled environment grinding

  • Garage and basement floor preparation

  • Durable steel shroud construction

  • 3/8” wall clearance

Applications and Features

  • Metabo Model# WE14-125VS

  • Grinding

  • Coating Removal

  • Trim Work

  • Vertical Walls

  • Durable Steel Shroud With 1-1/2" Vacuum Port

  • Removable Side For Edge Work

  • Variable Speeds For Polishing

Diamond Grinder/Polisher Applications

  • Leveling Uneven Concrete

  • Industrial Floors

  • Concrete Polishing

  • Garage Floors

  • Coating Removal

Diamond Grinder/Polisher Applications

  • Leveling Uneven Concrete

  • Industrial Flooring

  • Concrete Polishing

  • Garage Floors

  • Coating Removal

DG-50

The DG-50 Diamond Grinder/Polisher attachment is unlike any other diamond grinder polisher on the market today.

  • Designed for coating removal to high gloss polishing on totally dry concrete.

  • Four independent heads that gives a grinding width of 50 inches.

  • Quadruple, one piece 16” rubber mounted grinding heads (no planetary gears) that are adjusted up and down by air pressure, you have infinite adjustability.

  • Diamond segments can easily be changed

DG-25

The DG-25 Diamond Grinder/Polisher attachment is unlike any other diamond grinder polisher on the market today and is designed for coating removal to high gloss polishing on totally dry concrete.

  • The only mid-sized ride on surface preparation machine on the market

  • Interchangeable shotblast/ scarifier/ diamond grinder polisher heads

  • Designed for coating removal to high gloss polishing on totally dry concrete

  • Twin, one piece 16” rubber mounted grinding heads that are adjusted up and down using air pressure, giving you infinite adjustability.

  • Diamond segments can easily be interchanged from course diamonds for coating removal to fine resin pads for polishing

DG-4.5-ME

The DG-4.5-ME Hand Held Diamond Grinder/Polisher is excellent for all your trim work, edging, and light polishing work.

Video

Return to Main BW
Equipment Page

 

BW Concrete Preperation and Polished Equipment

bottom of page